1, energy saving
The biggest advantage of LED is energy saving. The average lamp power ranges from 20W to 100W, while the energy saving lamp power ranges from 5W to 65W. Bulb uses LED as the light source, and the power of only 0.8W-12W can replace the ordinary bulb of 15W-100W and the energy-saving lamp of 5W-50W. It can be seen that the power ratio of LED bulbs to ordinary bulbs and energy-saving lamps can reach 1:10.
Ordinary bulbs and energy-saving lamps are very hot when used, and the spectrum of energy-saving lamps contains IR (infrared). The content of ordinary bulbs is higher, and the temperature of many use environments will increase significantly. In summer, the refrigeration equipment is obviously aggravated. The amount of work and time, the end result is an increase in power consumption.
The LED lamp uses LED as the light source, and the LED emits light without IR (infrared) component, and the overall structure adopts a professionally designed heat dissipation structure. Temperature during normal operation is only 40-60 ° C, even if it is used in large quantities. It is much lower than the temperature generated by the sound bulb and the energy-saving lamp. In summer, the workload and time of the refrigeration equipment are significantly reduced. Combined with the difference in power (1:10), the result is a relative reduction in power consumption. It saves money and ultimately reflects the energy saving of LED lights.
2, short response time
The general energy-saving lamps will change due to changes in the ambient temperature. The normal operating temperature is between 20 and 40 degrees. It takes 5 to 6 minutes to reach a stable brightness in winter (at low temperatures). All the lamps work normally in a cold environment than in a warm environment, and the light is dim or accompanied by flickering. Only when the temperature rises, the brightness will gradually become normal at -35 ° C — 80 °. C, so generally do not consider its working environment temperature.
No need to make any changes, no need to use any technicians or professionals, read our instructions carefully, DIY can easily change from ordinary lighting to LED lighting.
4, long life
Ordinary bulbs and energy-saving lamps have a life of 1000 hours and 8,000 hours (4 hours per day); LED lighting life is 50000+ hours (24 hours a day)
Ordinary and energy-saving lamps contain IR (infrared) and UV (ultraviolet) radiation due to the spectrum at work, which can have a certain degree of health impact in some applications, such as:
(1). IR radiation will shorten the preservation time of food (especially meat, sushi, etc.), thus affecting its nutritional value.
(2), UV radiation, long-term exposure to the light source containing its ingredients, the color of the items illuminated by it will turn white, like clothes, pearls, watches, watches, crafts, paintings and so on.
LED lamps have no IR (infrared) and UV (ultraviolet) radiation due to their working spectrum, and have no adverse effects on health when used.
6, environmental protection
Ordinary bulbs and energy-saving lamps generate a large amount of IR (infrared) and UV (ultraviolet) radiation during operation. Moreover, the inside of the bulb is filled with an inert gas, and there are pumps and other harmful gases and substances in the production process and after use, and the pulverizing damage will also have a certain impact on the environment.
The LED lamp uses LED as the light source, and the LED works without IR (infrared) and UV (ultraviolet) radiation. The LED light source used does not have any filling gas, and there is no pulverizing damage, which will not cause bad to the environment. Impact, thus reflecting its environmental side.
The temperature of ordinary energy-saving lamps will be around 60-80 °C, and the temperature of ordinary incandescent lamps will be higher (80-120 °C). If you accidentally touch it, it will burn.
The LED light uses LED as the light source, with a professional heat dissipation structure, the working temperature is very low (40-60 ° C), and it will not burn on the hand.
The material used for energy-saving lamps and ordinary bulb products is glass, which is easily broken by collision with hard objects, causing permanent damage and cannot be used, and is accidentally cut by glass.
LED lamp uses a professionally designed outer casing, and the lamp material is made of PC material/acrylic die-casting.
Share the Post
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved