Street lights | Outdoor LED Street Lighting Fixtures

Jul 21, 2020

mars led street lights


In 2020, we have developed advanced LED street lighting systems for streets and roads. It can provide 20 to 100 lux (brightness) for the street.


Traditional street lights usually use 200W-400W lights. Except that the initial price is slightly cheaper, the consumption of traditional lamps is huge, and the life span is only one-fifth of LED lamps. Short life span and high maintenance cost are unsatisfactory for traditional street lights. The LED street lamp that needs to achieve the same illuminance can be realized with only 50-200W, which directly reduces the general energy consumption. In addition, its service life is several times that of traditional lighting. LED is the best alternative to street lighting to replace traditional lamps (metal halide, halogen, HPS, mercury vapor and fluorescent lamps).


Lampshining Mars LED street lighting has been professionally tested and has a professional light distribution angle (type2, type3) to ensure uniform and adequate road lighting. Our LED lights can reach the rated life of 50,000 hours of L70, and can be customized according to the lighting needs of your project.


led street lighting application


LED Street Lights Design


1. The light of led street light is unidirectional and there is no light diffusion to ensure the lighting efficiency. The light of led street light is irradiated to the area to be illuminated, which further improves the lighting efficiency to achieve the purpose of energy saving;


2. The color rendering of led street lights is high, the color rendering index of high-pressure sodium lamps is only about 23, and the color rendering index of led street lights is above 80, which is a very amazing change.


3. The light decay of the led street light is small, the light decay of less than 3% in a year, and it can still maintain high illuminance at the end of its life. High-pressure sodium light has a large attenuation, and can drop by more than 30% in one year;


4.LED street lights can be turned on and off in time. Traditional lamps require a warm-up time of 5-10 minutes, but LED street lights can be turned on and off immediately without a warm-up time. Therefore, the LED street light can realize intelligent control, and the installed sensor can automatically adjust or automatically switch according to the ambient brightness. This is also one of the reasons why LED street lights are 60-80% more energy efficient than traditional street lights.


5.LED street light has low maintenance cost and high life. Generally, it can recover the full investment cost in less than 2 years.


6. led street light is more environmentally friendly, why use led street light is more environmentally friendly? The led itself does not contain lead, mercury, no pollution, no flicker, safety, environmental protection, and can solve the problems of mercury pollution in traditional lighting.

led street light design

Why use Lampshining LED Street Lights?


1. Very suitable for outdoor use

LED light intensity does not decrease at low temperatures, nor does it require higher voltages. In fact, its performance is even better when the environment gets cold. This is why LED street lights are the best outdoor fixtures.


2. Better control

Controllable lighting, through the sensor so that the LED street light can automatically adjust and turn on and off according to the environment. This is very helpful in terms of energy saving and has a longer service life. LED lights may cost more to install initially, but obviously they will pay for themselves in a shorter period of time.


3. Durability

LED lamps do not have the appearance of a filament or glass, but are mounted on a circuit board and have soldered leads that connect the parts together, so they are resistant to cracking and vibration.


4. Low maintenance

LED lights require less power and maintenance, which means more labor and replacement costs can be saved. At the same time, the visibility of roads has increased and roads have become safer.


5. Longer life

Incandescent bulbs typically last 1,000 hours, while fluorescent lamps last 8,000-10,000 hours. High-quality LED street lights can be used for a long time, with an average service life of more than 50,000 hours.


6. Non-toxic materials

LEDs do not contain toxic elements such as mercury or metal halides, and can be safely discarded without polluting the environment at the end of their life.


7. LED does not cause burn hazard

Only 10% of the actual power used by incandescent lamps is converted into light, and a large amount of power is converted into thermal radiation. Excessive radiant heat and ultraviolet radiation may be harmful to the human body. And LED street lights will not.


8.Energy efficiency

Compared to all traditional light sources, LED street lights consume the lowest amount of energy and consume more than 60% less energy than incandescent, fluorescent and halogen lamps. Unlike these traditional lighting systems, resources are not wasted, as LED street lights can project directional light and properly illuminate the required area.


9. Instant on and off lighting

Traditional lighting systems require some warm-up time to reach 100% lighting brightness. LED street lights do not require any warm-up time, you can immediately turn the luminaire on or off, dim it and adjust it to 100% brightness without delay.


10. High quality light source

From the perspective of driver and pedestrian safety, the uniformly distributed municipal LED street lighting provides a clearer view of the road ahead. The quality of LED lighting greatly improves the quality of traditional lighting. The light generation of LEDs has a high CRI or color rendering index, which is very similar to natural light. This can provide better lighting for roads and sidewalks.


led street lighting


In order to get better help in your LED Street Lighting project or need more information, please feel free to contact lampshining LED Light Manufacturer.

hot product

Contact us

Verification code
Follow us
twitter card facebook card linkedin card pinterest card
  • E-mail: sales@lampshining.com
  • Tel: +86 755 3355 6070
  • Phone: +86 136 1294 5445
  • Skype: lampshining87
  • Add: 4th floor Building K Yuanling Zhixuanhan industrial Area ,Yuanmei community Shiyan Town,Bao'an District,Shenzhen China.

Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved

Top