1. 1500W;
2. 240,000(160Lm/W);
3. Replaceable 3000-3500W HPS, MH, HQI;
4. ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved;
5. Folding aluminum fin design which are very light weight.;
6. The lamp efficiency reaches 160LPW, with higher brightness and less energy consumption;
Overview
Specifications
| Model No. | LSHM‐1500W‐LV(XXK)MAX | |
| Power | 1500W | |
| Luminous Flux(±3%) | 240,000 Lumens (160Lm/W) | |
| Protection level | IP66 | IK10 |
| Power Factor | >0.95 | |
| Weight | 29kg | |
| Wind rating | 51.0-56.0m/s | |
| Driver Type | Meanwell 5*ELGC‐300‐H-A | |
| Light Source | Lumileds 5050 | |
| Input Voltage | 100-277 VAC | |
| CCT | 3000K 4000K 5000K 5700K 6500K | |
| CRI | Ra70 (Ra80, Ra90 optional) | |
| Life Time | L70/B10 >50,000hours | |
| Dimmable | Dimmable and Non-dimmable | |
| Warranty | 5 Years / 7 years extended warranty available | |
| Beam Angle | 10 / 20 / 40/ 60 / 90 degree/ TypeIV/ 135*60 degree(P50) | |
| Certification | ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved | |
1500W High Power Outdoor LED High Pole Lighting for Tower, Tunnels, Velodrome
Slim Max high output LED pole top area lighting, with 6 selectable beam angles and three mounting options. Very suitable for tower lighting, tunnel lighting, arena lighting, outdoor large area lighting. Anti-corrosion, safety, energy saving, high efficiency 160LM / W is its biggest feature.
Size
819*744.6*147mm
Feature
1. High luminaire efficiency up to 160lm/w；
2. Marine grade aluminum housing；
3. IP66 and IK10 protection rate；
4. 5 years warranty；
5. Folding aluminum fin design which are very light weight；
6. ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved；
Why Choose Slim Max 1500W Outdoor LED Pole Area Lighting?
1.High Efficiency
Uses high quality Lumileds 5050, LED pole flood light Efficiency up to 160Lm/W. Save more energy consumption.
2.Heat dissipation
Folding aluminum fin design which are very light weight. Increase the heat dissipation surface area by air cooling to dissipate heat and expand the contact area with air! It speeds up the spread of heat! Thermal effect is good! Compared with traditional die-cast aluminum and profile aluminum, which is heavier and there are certain safety risks. On the contrary ,the aluminum fin heat sink are more secure.
3.Waterproof IP66
Waterproof IP66, safer for outdoor use.
4.Dustproof net
protect the lamp from other debris.
5.Optional Anti-glare plate
6. Higher quality lighting
The lampshining Slim plus series LED high mast light can achieve high-quality lighting, CRI> 80. If there is a higher requirement for lighting, we can customize CRI> 90.
Installation
1.Wall installation 2. Groud installation 3. pole installation.
The bracket design can be installed in a variety of ways and can adapt to the lighting of different scenes.
Application
Click to contact us for more detailed information and the latest quotation!
Beam angle
The optical lens is made of PC, and the light transmittance reaches 92%, reducing the loss of light, maximizing the lumen and uniformity of the lighting area and reducing the lighting pollution to nature and human life. Optional 10/20/40/60/90 degree / TypeIV / P50 beam angle.
Carton
1500W: 1pc/ 82*89*22cm GW:33Kg
Contact Us
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved
