● Watt: 1440W
● Lumens: 230,400/ 252,000
● Light Source: Lumileds 5050
● Input Volt: 100-277VAC
● IP Rating: IP66 - IK10
● Size: 860*650*188mm
● Lamp Weight: 22kg
● CCT (Color Temp): 3000, 4000, 5000, 6000
● 5 years warranty
● Beam Angle: 10/20/40/60/90/140*100/135*60(P50)/70*30
|Chip Brand||Lumileds/ Osram 5050|
|Beam Angle||10/ 20/ 40/ 60/ 90 degree/ 140*100/ 135*60 degree(P50)/ 70*30|
|Driver||Meanwell 6*ELG-240-48A/ 6*XLG-240-H-A|
|IP Rating||IP66 & IK10|
|CRI||Ra70 (Ra80, Ra90 optional)|
|Dimmable||Optional dimmable and non-dimmable|
|Certification||ETL DLC TUV CE CB SAA RoHS LM79 LM80 TM21 Salt Spray test approved|
|Life Time||L70/B10 >50,000hours|
|Warranty||5 Years / 7 years extended warranty available|
Outdoor 6 Module 1440W High Power LED Sports Lights
The SLIM PRO series of LED Sports lights are designed to illuminate large sports areas. The combined design of the modules allows more flexible rotation and transformation of the illumination angle, achieving the best illumination and uniformity required by the sports venue.
Not only that, it has 0-10V dimmable light, it lights up when it is turned on, no preheating is required, a 5-year warranty, and a service life of 50,000 hours. This means that the service life of the lamps can be guaranteed, and you no longer need to replace all lamps every other year.
1. High luminaire efficiency up to 175lm/w;
2. Marine grade aluminum housing;
3. IP66 and IK10 protection rate;
4. 5 years warranty;
5. Folding aluminum fin design which are very light weight;
6. ETL DLC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved;
Why Choose 1440W Outdoor LED high mast Lighting?
Uses high quality Lumileds 5050, LED Sport Light Efficiency up to 175Lm/W. Save more energy consumption.
Folding aluminum fin design which are very light weight. Increase the heat dissipation surface area by air cooling to dissipate heat and expand the contact area with air! It speeds up the spread of heat! Thermal effect is good! Compared with traditional die-cast aluminum and profile aluminum, which is heavier and there are certain safety risks. On the contrary ,the aluminum fin heat sink are more secure.
Die-cast connector can realize the conversion of multiple modules to single module.
1.IP66 & Lightning protection & IK10. Waterproof IP66 and lightning protection 10/20KV, IK10 protective design allows Slim PRO LED High MAST LIGHT to withstand harsh environments;
2.Each module of slim pro high mast lights series comes with M20 Waterproof Breathable Pressure Relief Vent Plug;
5. Higher quality lighting
The lampshining Slim pro series LED sport light can achieve high-quality lighting, CRI> 80. If there is a higher requirement for lighting, we can customize CRI> 90.
1.Wall installation 2.Ground installation 3.Pole installation
Click to contact us for more detailed information and the latest quotation!
The optical lens is made of PC, and the light transmittance reaches 92%, reducing the loss of light, maximizing the lumen and uniformity of the lighting area and reducing the lighting pollution to nature and human life. Optional 10/20/40/60/90 degree / TypeIV / P50 beam angle.
1440W: 1pc/ 104*66*30cm GW:28Kg
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
The maintenance of aircraft hangars involves many sophisticated accessories, so the lighting of the aircraft hangar is a very important factor. Whether it is a small hangar or a large aircraft hangar, choosing appropriate lighting fixtures for the hangar lighting can reduce energy consumption And in
The maintenance of aircraft hangars involves many sophisticated accessories, so the lighting of the aircraft hangar is a very important factor. Whether it is a small hangar or a large aircraft hangar, choosing appropriate lighting fixtures for the hangar lighting can reduce energy consumption And increase visibility, thereby reducing errors and inc
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved