Voltage: 100-277VAC, 50/60Hz
Driver type: Sosen SS-120CNL-130
Net weight : 3.0kg
Color Temp: 3000K 4000K 5000K 5700K 6000K
Beam Angle: 90 /120 degree
Light Source: Osram 2835
Certification: ETL cETL DLC Premium GS TUV CB SAA D Mark IECEE LM79 LM80
100W Slim Folding Aluminum Fin UFO LED High Bay Light
Slim Fin series UFO LED High Bay light Uses high-quality aluminium case and Folding aluminum fin design. And meet the protection conditions of IP65 and IK10. The lightweight design of 100W which weighs only 3kg, has better heat dissipation effect. Slim fin ufo led high bay light has the characteristics of beauty, high quality and high safety. 160LM / W efficiency can greatly save energy consumption and is suitable for industrial warehouses, workshops, area, Carport, shop lighting.
|Efficacy (5000K, Ra70)||165(±3%) LM/W|
|Luminaire Net Weight||3kg|
|Frequency||50 / 60Hz|
|Driver Type||Sosen Driver SS-120CNL-130|
|Light Source||Osram 2835|
|CCT||3000K 4000K 5000K 5700K 6000K|
|Life Time||L70/B10 >50,000hours|
|Warranty||5 Years / 7 years extended warranty available|
|Beam Angle||90 / 120 degree|
|Certification||ETL cETL DLC Premium GS TUV CB SAA D Mark IECEE LM79 LM80|
Why choose Slim Fin UFO LED High Bay Light?
CRI>80, Mounting height: 6-20meter. High Luminaire up to 160lm/w.
2.IP65 and IK10 protection
Use high-quality aluminium case, elaborate processing, good heat radiation effect, waterproof grade IP65 and IK10 rating of anticollision.
3.Folding aluminum fin design
Folding aluminum fin design which are very light weight. Increase the heat dissipation surface area by air cooling to dissipate heat and expand the contact area with air! It speeds up the spread of heat! Thermal effect is good! Compared with traditional die-cast aluminum and profile aluminum, which is heavier and there are certain safety risks. On the contrary ,the aluminum fin heat sink are more secure.
1.High luminaire efficiency up to 160lm/w, CRI > 80;
2.Mounting Height: 6-20meter;
3.IP65 and IK10 protection rate ;
4.5 years warranty;
5. Folding aluminum fin design which are very light weight;
6. ETL cETL DLC Premium GS TUV CB SAA D Mark IECEE LM79 LM80;
|(60 degree)Aluminum reflector||Yoke Bracket||PC reflector without end cap||PC reflector with end cap||Tempered|
Folded fin heat sinks
Folded fins are created by a progressive stamping method. The fins are then bonded to a base with thermally conductive epoxy, brazing, welding, or similar metallurgical bonds, to create a heat sink. An advantage of folded fin heat sinks is the ability to combine aluminum and copper to tailor the performance of the heat sink to the particular application.
The main advantages are：
1.Lightweight 2.Reduced material cost 3.Forced airflow or natural convection 4. High aspect ratio fins
100W Slim Fin UFO LED High Bay Light package
|(20ft container = 1500pcs) 50% shipping cost saving|
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved