● Watt: 100W
● Lumens: 16,000
● Light Source: Osram 2835
● Input Volt: 100-277VAC
● IP Rating: IP65 - IK10
● Size: 280*115mm
● Lamp Weight: 3kg
● CCT (Color Temp): 4000, 5000, 6000k
● 5 years warranty
● Beam Angle: 60/ 90/ 120 degree
|DLC NO.||LSUFO-100WND-LVS/ LSUFO-100WD-LVS|
|CRI||Ra70 (Ra80, Ra90 optional)|
|Light Source||Osram 2835|
|CCT||4000K, 5000K, 5700K|
|Beam angle||60/90/120 degree|
|Certificates||ETL, cETL, DLC premium, TUV, CE, RoHS, SAA ctick, CB, LM79, LM80|
100w LED high bay lighting
High Voltage 347-480VAC available
Long life span and less brightness degradation
Efficiency of power supply is more than 90%.
No UV and near-IR radiation in the light beam
Merryteck sensors and Zigbee system compliable
Tempered glass,PC reflector,Aluminum reflector,Yoke Bracket,milky cover are available
High qulity LED chip
Uses Osram 2835 led chip with high effcacy up to 160Lm Per watt.
Ultra Slim Lightweight design
1.Ultraslim, lightweight design for easier installation and weighing just 2.35kg
2.Aluminum heat dissipation system, Heat sink body is 20% heavier than other competitors which brings the better heat dissipation performance!
1.IP65(TUV report available)
2.Can't be immersed into the water
3.anti-dust design, able to be with flushable cleaning
Zigbee wireless control
1.Save 60% of manpower 2.Save 60-80% energy 3.Longer life
Zigbee contorller+Motion sensor
Zigbee Daylight sensor
Zigbee Touch contorller
Optional installation method
Optional chain installation and Yoke bracket installation
Suitable for large and small warehouses, gas stations, museums, exhibition halls, indoor sports fields, barns, factory lighting.
Can change different PC covers or lens according to different occasions, easy to change accessories make UFO LED High Bay Light can be adjusted atany time to suit lighting occasions. Choice of 60, 90, 120 degrees.
100-150W : 1pc/34*34*16cm GW: 3kg
(20ft container = 1500pcs)
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved