● Watt - 200W
● Lumens - 32,000/ 40,000
● Light Source - Lumileds 5050
● Input Volt - 100-277VAC
● IP Rating - IP65 - IK10
● Size - Dia277*H145
● Lamp Weight - 2.7kg
● CCT (Color Temp) - 4000-5000k
● 5 years warranty
● Beam Angle - 90/ 120 degree
|Chip Brand||Osram 2835|
|Driver||Sosen Driver SS-200CNL-260|
|Beam Angle||90/ 120 degree|
|IP Rating||IP65 & IK10|
|Life Time||L70/B10 >50,000hours|
|Warranty||5 Years / 7 years extended warranty available|
|Certification||ETL cETL DLC Premium TUV CB SAA IECEE LM79 LM80|
200W Slim Fin UFO LED High Bay Light
Slim Fin series UFO LED High Bay light Uses high-quality aluminium case and Folding aluminum fin design. And meet the protection conditions of IP65 and IK10. The lightweight design of 200W which weighs only 5kg, has better heat dissipation effect. Slim fin ufo led high bay light has the characteristics of beauty, high quality and high safety. 160LM/W efficiency can greatly save energy consumption and is suitable for commerce industrial warehouses, workshops, area, Carport, shop high ceiling lighting.
Why choose Slim Fin UFO LED High Bay Light?
1.High luminaire efficiency up to 200lm/w, CRI > 80;
2.Mounting Height: 6-20meter;
3.IP65 and IK10 protection rate ;
4.5 years warranty;
5. Folding aluminum fin design which are very light weight;
6. ETL cETL DLC Premium TUV CB SAA IECEE LM79 LM80;
CRI>80, Mounting height: 6-20meter. High Luminaire up to 200lm/w.
2.IP65 and IK10 protection
Use high-quality aluminium case, elaborate processing, good heat radiation effect, waterproof grade IP65 and IK10 rating of anticollision.
3.Folding aluminum fin design
Folding aluminum fin design which are very light weight. Increase the heat dissipation surface area by air cooling to dissipate heat and expand the contact area with air! It speeds up the spread of heat! Thermal effect is good! Compared with traditional die-cast aluminum and profile aluminum, which is heavier and there are certain safety risks. On the contrary ,the aluminum fin heat sink are more secure.
|(60 degree)Aluminum reflector||Yoke Bracket||PC reflector without end cap||PC reflector with end cap||Tempered|
Folded fin heat sinks
Folded fins are created by a progressive stamping method. The fins are then bonded to a base with thermally conductive epoxy, brazing, welding, or similar metallurgical bonds, to create a heat sink. An advantage of folded fin heat sinks is the ability to combine aluminum and copper to tailor the performance of the heat sink to the particular application.
The main advantages are：
1.Lightweight 2.Reduced material cost 3.Forced airflow or natural convection 4. High aspect ratio fins
Carton size: 33*33*19cm
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
The maintenance of aircraft hangars involves many sophisticated accessories, so the lighting of the aircraft hangar is a very important factor. Whether it is a small hangar or a large aircraft hangar, choosing appropriate lighting fixtures for the hangar lighting can reduce energy consumption And in
The maintenance of aircraft hangars involves many sophisticated accessories, so the lighting of the aircraft hangar is a very important factor. Whether it is a small hangar or a large aircraft hangar, choosing appropriate lighting fixtures for the hangar lighting can reduce energy consumption And increase visibility, thereby reducing errors and inc
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved