● Watt: 40W
● Lumens: 5,800
● Light Source: Lumileds 3030
● Input Volt: 100-277VAC
● IP Rating: IP66 - IK08
● Arm Dia: 60/ 76mm
● Size: 18.7*10.2*3.75
● Lamp Weight: 4.2kg
● CCT (Color Temp): 3000, 4000, 5000, 6000
● 5 years warranty
● Beam Angle: - TypeII, TypeIII
|Chip Brand||Lumileds 3030|
|Arm Dia||60/ 76mm|
|Beam Angle||TypeII, TypeIII|
|Expected Lifespan||50,000 Hours to 70% Brightness|
|Dimming Function||1 - 10V Continuous/ PWM DALI Optional|
>0.95 / 230VAC
|IP & IK Rating||IP66 & IK08|
|Thermal Management Type||Natural air cooling|
|Warranty||5 years warranty|
ENEC TUV CE CB IECEE SAA RoHS LM79 LM80 TM21 IK08 Salt Spray test approved
40W LED Street Lights
A minimal total cost of ownership was the driving force behind the development of the Mars range. It is equipped with LEDs and various dimming and remote management options for a dramatic reduction in energy consumption. It oﬀers a very competitive alternative to luminaires equipped with traditional light sources such as highpressure sodium lamps.
Continues to raise the bar on performance and lower the total cost of ownership by delivering higher value to municipalities and facility managers. The new Mars Tiny Model street light with its unrivalled lumen output for roadway lighting and economic performance expands the application range replacing up to 125W HPSV/MH street lights.
Mars Tiny Model series the perfect ﬁt for a wide array of roadway applications helping to improve the economic value for development authorities, municipalities or owned utilities. Are die-cast from aluminum to provide efficient heat dissipation. This ensures that the LEDs and drives operate at low temperatures during operation and can last from 5 to 10 years!
|Length||17,28 in (439mm)||Height||3.74 in (95mm)|
|width||7.20 in (183mm)||Height (w/photocell)|
5.27 in (134mm)
11.06 in (281mm)
2.Streamlined design makes the drag coefficientsmaller, more beautiful and safer; meets theaesthetic equirements of high-end street light
3.The surface is made of 4mm thick tempered glass, which can pass the IK08 anti-attack test and meet the requirements of high-end street lights.
4.Easy-to-assemble design means maintenance will be easy and quickest when problems arise.
Mars Tiny street light is a perfect solution for secondary roads, parks gardens and pathways. It is aesthetically appealing due to its compact design and oers wide range of outdoor solutions with reduced cost of ownership. It can very well replace most of the ﬂuorescent based luminaires (CFL/FTL) and also ensures uniform lighting distribution.
1.The smooth body would greatly diminish dust accumulation, and minimize environment impacts to the fixture's performance and lifespan.
2.The dust will be washed away automatically by the wind and rain with the unique circular arc design and smooth surface, which is good for the lamp fixture heat dissipa-tion when all the dust is gone away.
The Mars fixture includes simple installation with convenient abjustability.
Mars fixture can be mounted horizontally or vertically with our
universal slip fit system. simply detach and rotate the slip fitter 180°
to achieve the vertical orientation. Both orientation options include
the ability to rotate 15 degree or more.
Very suitable for park roads, alleys, and other small and medium-sized areas
Complete illumination across the entire roadway
No external reflectors required
Safe for industrial applications
Dramatic energy savings
Optical PC lens present in the MARS street lights provides a high-transmittance of >95%. At the same ime, they reflect most of the light and reduce the attrition rate. You can also customize the beam angle.The lights source and the lens have a distance of less than 0.55mm, which ensures that the loss ratio is <6%.
1. Photocell(Optional accessories)
The Mars Street light Photocell integration controls the illumination of the fixture by detecting surrounding ambient light.
Photocell base comes pre-installed, lock cap included in package when shipped and ready to apply during assembly, Twist-Lock Photocell automatically turns lights On at Dusk and O ffat dawn.
2. 10KV SPD Lightning arrester(Optional accessories)
The standard 100-277v fixture comes equipped with 10kA surge protection already integrated.
SPD1 surge protection devices is perfectly adapted for outdoor lighting to provide single phase protection for line/neutral, line/ground and neutral/ground in accordance with LEEE C62.41 2002 C High, UL 1449 and IEC61643-11.
3. Disconnect switch
The full range of standard open circuit switches, open the power cover will cut off the power supply of the entire lamp system, plus cut off the mains before installation to double The role of heavy protection. Close the power cover and power it on.
4. Mounting(standard configuration)
The Mars Street Light comes standard with a 60mm slip fitter.
Optional slip fitter mounts are available at 60mm, and 76mm diameters.
Luminaire Weight: 4.2KG
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved