● Watt: 80W
● Lumens: 10,400/ 12,000
● Light Source: Lumileds 3030/ 5050
● Input Volt: 100-277VAC
● IP Rating: IP66 - IK08
● Arm Dia: 48/ 60mm
● CCT (Color Temp): 3000, 4000, 5000, 6000
● 5 years warranty
● Beam Angle: TypeII, TypeIII
| Model | LSMSL-S80W-LV(XXK) |
| Watt | 80W |
| Lumen | 10,400 |
| Efficiency | 130LM/W±3% |
| Chip Brand | Lumileds 3030 |
| Input Volt | 200-240VAC |
| Housing | Grey |
| Meanwell Class I Driver | XLG-75-H-A |
| Moso Class I Driver | X6E-075V75 |
| Moso Class II Driver | XCP-75V062 |
| CCT | 3000-6000K |
| Arm Dia | 48mm/ 60mm |
| Size | 242*109*575mm |
| Surge protection | 6KV |
| Beam Angle | TypeII, TypeIII, TypeIV |
| CRI | >70 |
| Lifespan | 100,000 Hours |
| Dimming Function | 1 - 10V Continuous/ PWM DALI Optional |
| Power Factor | >0.95 / 230VAC |
| IP & IK Rating | IP66 & IK09 |
| Thermal Management Type | Natural air cooling |
| Warranty | 5 years warranty |
| Cartifications | ENEC TUV CE CB IECEE SAA RoHS LM79 LM80 TM21 IK08 Salt Spray test approved |
| Model | LSMSL-S80W-LV(XXK) |
| Watt | 80W |
| Lumen | 12,000 |
| Efficiency | 150LM/W±3% |
| Chip Brand | Lumileds 5050 |
| Input Volt | 200-240VAC |
| Housing | Grey |
| Meanwell Class I Driver | XLG-75-H-A |
| Moso Class I Driver | X6E-075V075 |
| Moso Class II Driver | XCP-75V062 |
| CCT | 3000-6000K |
| Arm Dia | 48mm/ 60mm |
| Size | 242*109*575mm |
| Surge protection | 6KV |
| Beam Angle | TypeII, TypeIII, TypeIV |
| CRI | >70 |
| Lifespan | 100,000 Hours |
| Dimming Function | 1 - 10V Continuous/ PWM DALI Optional |
| Power Factor | >0.95 / 230VAC |
| IP & IK Rating | IP66 & IK09 |
| Thermal Management Type | Natural air cooling |
| Warranty | 5 years warranty |
| Cartifications | ENEC TUV CE CB IECEE SAA RoHS LM79 LM80 TM21 IK08 Salt Spray test approved |
| Model | LSMSL-S80W-LV(XXK) |
| Watt | 80W |
| Lumen | 13,200 |
| Efficiency | 165LM/W±3% |
| Chip Brand | Lumileds 5050 |
| Input Volt | 200-240VAC |
| Housing | Grey |
| Meanwell Class I Driver | XLG-100-H-A |
| Moso Class I Driver | X6E-100V150 |
| Moso Class II Driver | XCP-105V062 |
| CCT | 3000-6000K |
| Arm Dia | 48mm/ 60mm |
| Size | 242*109*575mm |
| Surge protection | 6KV |
| Beam Angle | TypeII, TypeIII, TypeIV |
| CRI | >70 |
| Lifespan | 100,000 Hours |
| Dimming Function | 1 - 10V Continuous/ PWM DALI Optional |
| Power Factor | >0.95 / 230VAC |
| IP & IK Rating | IP66 & IK09 |
| Thermal Management Type | Natural air cooling |
| Warranty | 5 years warranty |
| Cartifications | ENEC TUV CE CB IECEE SAA RoHS LM79 LM80 TM21 IK08 Salt Spray test approved |
Mars LED Street Lights 80W
Mars LED Street light is a perfect Outdoor lighting solution for secondary roads, parks gardens and pathways.
80W
130-165Lm/W
4000K-6000K
ENEC TUV CE CB IECEE SAA RoHS
LM79 LM80 TM21
IK08 Salt Spray test approved
High brightness
Using high-quality lamp beads to reduce light waste, the utilization rate of light is higher, CRI>70, the light efficiency can reach 130-165Lm/W!
Lumileds 3030
Lumileds 5050
Adjustable angle
Mars LED Street Light You can select Vertical / Horizontal installation to support 42mm / 60mm / 78mm mounting holes. And the luminaire can be rotated ± 15degree, which can better obtain the best illuminance.
±15 degree
Waterproof & Lightning Protection
The lamps have passed the waterproof IP66 and anti-impact IK09 tests, and are equipped with 10KA lightning arresters. Even in bad weather outdoors, it can ensure that the lamps are not affected and work normally, increasing road safety.
IP66
10KA
Class I /Class II Driver
In order to ensure the normal and stable operation of the lamps and reduce faults and insufficient light, the power supply of the lamps is very important. The lamps can choose Meanwell Class I driver/ Moso Class I driver/ Moso Class II driver, which can be very stable and safe to continuously output constant power.
Meanwell Class I driver
Moso Class I driver
Moso Class II driver
Self-cleaning
The smooth body would greatly diminish dust accumulation, and minimize environment impacts to the fixtures performance and lifespan.
The dust will be washed away automatically by the wind and rain with the unique circular arc design and smooth surface,which is good for the lamp fixture heat dissipation when all the dust is gone away.
Self-cleaning
Other Watt
Mars LED Street Light is available in wattage from 40W to 200W, which is the best choice to replace the existing MH/HID street lights of 100W-500W.
Phtotmetric Options
The beam angle can be selected from TypeII, TypeIII, TypeIV. Professional light distribution angle can better achieve uniform and efficient lighting effect.
TypeII
TypeIII
TypeIV
Application
Main roads, secondary roads, branch roads, expressways, overpasses, urban roads, overpasses, schools, residential areas, industrial areas, parks, city squares, courtyards, etc.
Photocell
| Photocell |  | The Mars Street Light Photocell integration controls the illumination of the fixture by detecting surrounding ambient light. It can be turned off automatically at dawn, and the street light automatically turned on at dusk. |
| Surge Protection Device(10KV) |  | The standard 100-277v fixture comes equipped with 10kA surge protection already integrated. |
| Mounting |  | Mars Slip Fitter 40mm Mars Slip Fitter 50mm Mars Slip Fitter 60mm(Standard) |
Package details
68*31*18cm
Luminaire Weight: 6.6KG
Contact Us for Quote & Lighting Opinion
Contact Us
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved
