● Watt: 50W
● Lumens: 7,000/ 8,500
● Light Source: Lumileds 3030
● Input Volt: 46-48VDC
● Plug: M15 Male Plug
● Size: 257*75*37mm
● Lamp Weight: 0.5kg
● CCT (Color Temp): 3000-6000K
● 5 years warranty
● Beam Angle: 15/ 25/ 40/ 60/ 90/ 120/ 30*70/ 49*21/ 136*78
|Chip Brand||Lumileds 3030|
|Plug||M15 Male Plug|
|IP & IK Rating||IP65 & IK10|
|Life Time||L70/B10 >50,000hours|
|Warranty||5 Years warranty|
|Dimmable||Dimmable and Non-dimmable|
|Beam Angle||15/ 25/ 40/ 60/ 90/ 120/ 30*70/ 49*21/ 136*78 degree|
50W LED Fin Module Light
Optional gray and black.
The opticallens is made of PC, and the Transmittance reaches 92%,reducing light loss.maximize the lumens on where it should be lit up and evenness, minimize lighting pollution to nature and human life.
2.Aluminum Heat Sink Hemming Design
The module heat sink adopts the hemming design to prevent the deformation of the heat sink due to crash during the shipment and enhance the flatness and strength of the contact surface of the module heat sink.
3.Pure Aluminum Heat Sink
The modules can be rotated ina chain, which can meet the needs of large area lighting and achieve perfect area lighting.
4.M15 Quick Linker
The cable lenath is exposed 15cm, the default is M15 male plug. it can be customized according to different requirements.
15/ 25/ 40/ 60/ 90/ 120 degree/ 30*70/ 49*21/ 136*78 degree.
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved