● Watt: 100W
● Lumens: 13,000
● Light Source: Lumileds 3030
● Input Volt: 100-277VAC
● IP Rating: IP66 - IK08
● Arm Dia: 60/ 76mm
● Size: 24.8*12.36*5.55''
● Lamp Weight: 5.3kg
● CCT (Color Temp): 3000, 4000, 5000, 6000
● 5 years warranty
● Beam Angle: TypeII, TypeIII
|Chip Brand||Lumileds 3030|
|Arm Dia||60/ 76mm|
|Beam Angle||TypeII, TypeIII|
|Expected Lifespan||50,000 Hours to 70% Brightness|
|Dimming Function||1-10V Continuous/ PWM DALI Optional|
>0.95 / 230VAC
|IP & IK Rating||IP66 & IK08|
|Thermal Management Type||Natural air cooling|
|Warranty||5 years warranty|
ENEC TUV CE CB IECEE SAA RoHS LM79 LM80 TM21 IK08 Salt Spray test approved
100W LED street engry saving lamp head
Excellent for main roads, collecting roads, and roundabouts
Complete illumination across the entire roadway
No external reflectors required
Safe for industrial applications
High performance design
Dramatic energy savings
1.The smooth body would greatly diminish dust accumulation, and minimize environment impacts to the fixture's performance and lifespan.
2.The dust will be washed away automatically by the wind and rain with the unique circular arc design and smooth surface, which is good for the lamp fixture heat dissipa-tion when all the dust is gone away.
IP66 sealed to protect the LEDs and lenses from coming into contact with the outside environment and so maintain photometric performance over time.
1.Streamlined design makes the drag coefficient smaller,more beautiful and safer; meets the aesthetic requirements of high-end street lamps.
2.The surface is made of 4mm thick tempered glass, which can pass the IK08 anti-attack test and meet the requirements of high-end street,
3.Die-casted with ADC-12 aluminum, the thickness of the shell is 3mm, which is more conducive to heat conduction and divergence.
4.A graphene heat conductive material is used between the PCB and the heat sink, which has higher thermal conductivity and higher material stability.
The LEDS Module and Driver can be easily removed,allowing real on-site replacement at the end of its service life in order to take advantage of future technological developments. This easy and rapid procedure reduces. maintenance costs and contrbutes to reducing the total cost of ownership.
The Mars fixture includes simple installation with convenient abjustability.
The Mars fixture can be mounted horizontally or vertically with our universal slip fit system. simply detach and rotate the slip fitter 180° to achieve the vertical orientation. Both orientation options include the ability to rotate 15degree or more.
Accessory:Disconnect switch(standard configuration)
The full range of standard open circuit switches, open the power cover will cut off the power supply of the entire lamp system, plus cut off the mains before installation to double The role of heavy protection. Close the power cover and power it on.
Accessory: 10KV SPD Lightning arrester(standard configuration)
The standard 100-277v fixture comes equipped with 10kA surge protection already integrated.
SPD1 surge protection devices is perfectly adapted for outdoor lighting to provide single phase protection for line/neutral, line/ground and neutral/ground in accordance with LEEE C62.41 2002 C High, UL 1449 and IEC61643-11.
Accessory: Photocell(Optional accessories)
The Mars Street light Photocell integration controls the illumination of the fixture by detecting surrounding ambient light.
Photocell base comes pre-installed, lock cap included in package when shipped and ready to apply during assembly, Twist-Lock Photocell automatically turns lights On at Dusk and O ffat dawn.
Accessory: Mounting(standard configuration)
The Mars Street Light comes standard with a 60mm slip fitter.
Optional slip fitter mounts are available at 60mm, and 76mm diameters.
Luminaire Weight: 6.6KG
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved