● Watt: 100W/ 150W/ 200W/ 240W/ 300W
● Lumens: 18,000-54,000
● Light Source: Lumileds 5050
● Input Volt: 100-277VAC
● IP Rating: IP66 - IK10
● Anti-Glare Design
● CCT (Color Temp): 3000-6000K
● Linkable and portable
● 5 years warranty
● Beam Angle: 20/40/60/90/30*70/97*47(Type 4)/135*60(P50);
LSNFL-100W(XXK) / LSNFL-150W(XXK) / LSNFL-200W(XXK) / LSNFL-240W(XXK) / LSNFL-300W(XXK)
|Watt||100W, 150W, 200W, 240W, 300W|
|LED Brand||Lumileds 5050|
|IP & IK||IP66 & IK08|
|Color Temp||3000K, 4000K, 5000K, 5700K, 6000K, 6500K|
|Optional Beam Angle||20, 40, 60, 90, 97*47 degree(Type 4), 135*60 degree(P50);|
|Number of lamp beads||72|
|Light source||Philips 5050|
|Certifications||ETL DLC ENEC TUV CB SAA LM79 LM80 IK08 Salt spray|
110V 220V Linkable LED Flood Light Fixtures
Linkable LED Flood Light are all large-scale projects. , Railroad tracks, construction sites, etc. provide high-quality LED temporary lighting to help better complete the work.
Many outdoor projects have a large span. In areas of 500 meters or more, this Linakble LED Flood Light uses only 30% of the power used by fluorescent lights or metal halides, which means it is lighter and more mobile. Good convenience.
Not only that, with a service life of 50,000 hours, higher quality light, and a 5-year warranty, you no longer need to replace the lamps every one or two years. Choosing our Linkable NEMO LED Flood Light is the most economical and effective lighting option for outdoor projects.
1. It can be connected with male and female butt joints, which is more convenient and quick to install;
2.Cable length can be customized according to actual requirements;
3.The end can be covered with waterproof caps instead of using the wiring connector;
1.Ultra high efficiency 180Lm/W LED lights;
2.Can be linked for outdoor temporary work;
3.Lightweight and stackable;
4.Can be wall-mounted, mast-mounted;
6.Optional 3000K-4000k color temperature;
7.ETL DLC ENEC TUV CB SAA LM79 LM80 IK08 Salt spray certification;
The bracket of this linkable LED Flood Light supports a rotation of 180 degrees, and you can rotate to achieve your satisfactory illumination angle. And the operation is simple, you only need to turn his fixed knob by hand to start adjusting the angle.
Optional Wall installation, Ground installation, Pole installation methods;
1. Portable floodlighting 2.linkable floodlighting 3.Temporary railway lighting
Beam angle application
The advantage of Polarized illumination angle is anti-glare, which does not shine on the athlete's eyes when playing, which makes the sports experience and training effect better. Optional 20, 40, 60, 90, 97*47(Type 4), 135*60(P50).
|Slip Fitter||Photocell sensor||1-10V Dimmable|
|SPD 10KV or 20KV||NEMA 3pin Photocell||Shorting Cap|
Optional plug wires and Extended wires
1. Please make sure that all wires are connected correctly when you are installing it.
2.Optional plug wires and Extended wires.
Carton size: 55*43*17cm GW: 6.5Kg
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved