3. Replaceable 800-1000W HPS, MH, HQI;
4. ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved certification;
5. The lamp efficiency reaches 180LPW, with higher brightness and less energy consumption;
6. Slim Plus LED high mast light is made of sturdy foldable aluminum fin module shell and heavy-duty anti-corrosion surface treatment;
Slim Plus 400W LED Light, 180Lm/W LED Lights, High Mast, High pole, Flood Light
Lampshining new 180Lm/W 400W outdoor pole LED high mast lighting fixtures replace traditional lighting fixtures and can immediately improve the quality of lighting in stadiums, large areas, roads, ports, and airports, and reduce energy consumption by as much as 75%. And passed the ENEC TUV CE CE CB SAA RoHS LM79 LM80 TM21 21 IK10 salt spray test approval.
Slim plus 400w pole mount led lighting fixtures. 180LM / W is very suitable for central streets, squares, parks, construction sites, docks, airports, Crane LED Lighting. More energy-saving, safe, life span up to 5 years, 100-277vac, very Suitable for replacing 1000W traditional lighting fixtures.
|Luminous Flux(±3%)||72,000 lumens(180Lm/w)|
|Driver Type||Meanwell 2*ELG-240-48A|
|Light Source||Lumileds 5050|
|Input Voltage||100-277 VAC|
|CCT||3000K 4000K 5000K 5700K 6500K|
|CRI||Ra70 (Ra80, Ra90 optional)|
|Life Time||L70/B10 >50,000hours|
|Dimmable||Dimmable and Non-dimmable|
|Warranty||5 Years / 7 years extended warranty available|
|Beam Angle||10 / 20 / 40/ 60 / 90 degree/ TypeIV/ 135*60 degree(P50)|
|Certification||ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved|
1. High luminaire efficiency up to 180lm/w；
2. Marine grade aluminum housing；
3. IP66 and IK10 protection rate；
4. 5 years warranty；
5. Folding aluminum fin design which are very light weight；
6. ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved；
Why Choose 400W Slim Plus LED High pole Light?
Uses high quality Lumileds 5050, LED High Mast Light Efficiency up to 180Lm/W. Save more energy consumption.
Waterproof IP66, safer for outdoor use.
Folding aluminum fin design which are very light weight. Increase the heat dissipation surface area by air cooling to dissipate heat and expand the contact area with air! It speeds up the spread of heat! Thermal effect is good! Compared with traditional die-cast aluminum and profile aluminum, which is heavier and there are certain safety risks. On the contrary ,the aluminum fin heat sink are more secure.
protect the lamp from other debris.
5.Laser pointer calibration
Laser Tech, help to do final calibration.
It is more convenient to control the illumination direction of the lamp during installation.
6. Higher quality lighting
The lampshining Slim plus series LED high mast light can achieve high-quality lighting, CRI> 80. If there is a higher requirement for lighting, we can customize CRI> 90.
Click to contact us for more detailed information and the latest quotation!
The optical lens is made of PC, and the light transmittance reaches 92%, reducing the loss of light, maximizing the lumen and uniformity of the lighting area and reducing the lighting pollution to nature and human life. Optional 10/20/40/60/90 degree / TypeIV / P50 beam angle.
Bending lamp mounted Bracket(optional)
Optional tilt angle bending bracket, more convenient installation
400W: 1pc/ 46*64*22cm
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved