3. Replaceable 2000W HPS, MH, HQI;
4. ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved certification;
5. The lamp efficiency reaches 180LPW, with higher brightness and less energy consumption;
6. Slim Plus LED high mast light is made of sturdy foldable aluminum fin module shell and heavy-duty anti-corrosion surface treatment;
|Luminous Flux(±3%)||144,000 lumens(180Lm/W±3%)||152,000 lumens(190Lm/W±3%)|
|Protection level||IP66, IK10|
|Driver Type||Meanwell 4*ELG-240-48A|
|Light Source||Lumileds 5050|
|Input Voltage||100-277 VAC|
|CRI||Ra70 (Ra80, Ra90 optional)|
|Life Time||L70/B10 >50,000hours|
|Dimmable||Dimmable and Non-dimmable|
|Warranty||5 Years / 7 years extended warranty available|
|Beam Angle||10 / 20 / 40/ 60 / 90 degree/ TypeIV/ 135*60 degree(P50)|
|Certification||ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved|
800W 144000Lm LED High Pole Area Lights, 2000W Metal Halide Equal
Lampshining new 180Lm/W 800W outdoor pole LED high mast lighting fixtures replace traditional lighting fixtures and can immediately improve the quality of lighting in stadiums, large areas, roads, ports, and airports, and reduce energy consumption by as much as 75%. And passed the ENEC TUV CE CE CB SAA RoHS LM79 LM80 TM21 21 IK10 salt spray test approval.
Our Slim Plus LED High Pole Area Lights is very suitable for the renovation or installation of old or new highway intersections, construction sites, large squares, natural parks, amusement park lighting fixtures. The efficiency of 180Lm / W can ensure that you do not need to install too many lamps Obtain sufficient high-quality lighting, more secure. Equivalent to 2000W MH, HQI.
1. High luminaire efficiency up to 180lm/w；
2. Marine grade aluminum housing；
3. IP66 and IK08 protection rate；
4. 5 years warranty；
5. Folding aluminum fin design which are very light weight；
6. ENEC TUV CE CB SAA RoHS LM79 LM80 TM21 IK10 Salt Spray test approved；
Why Choose 800W Slim Plus LED High Pole Area Lights?
Uses high quality Lumileds 5050, LED High Mast Light Efficiency up to 180Lm/W. Save more energy consumption.
Folding aluminum fin design which are very light weight. Increase the heat dissipation surface area by air cooling to dissipate heat and expand the contact area with air! It speeds up the spread of heat! Thermal effect is good! Compared with traditional die-cast aluminum and profile aluminum, which is heavier and there are certain safety risks. On the contrary ,the aluminum fin heat sink are more secure.
Waterproof IP66, safer for outdoor use.
protect the lamp from other debris.
5.Laser pointer calibration
Laser Tech, help to do final calibration.
It is more convenient to control the illumination direction of the lamp during installation.
6. Higher quality lighting
The lampshining Slim plus series LED high mast light can achieve high-quality lighting, CRI> 80. If there is a higher requirement for lighting, we can customize CRI> 90.
Click to contact us for more detailed information and the latest quotation!
The optical lens is made of PC, and the light transmittance reaches 92%, reducing the loss of light, maximizing the lumen and uniformity of the lighting area and reducing the lighting pollution to nature and human life. Optional 10/20/40/60/90 degree / TypeIV / P50 beam angle.
Bending lamp mounted Bracket(optional)
Optional tilt angle bending bracket, more convenient installation
800W: 1pc/ 66*64*22cm GW:20Kg
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
The maintenance of aircraft hangars involves many sophisticated accessories, so the lighting of the aircraft hangar is a very important factor. Whether it is a small hangar or a large aircraft hangar, choosing appropriate lighting fixtures for the hangar lighting can reduce energy consumption And in
The maintenance of aircraft hangars involves many sophisticated accessories, so the lighting of the aircraft hangar is a very important factor. Whether it is a small hangar or a large aircraft hangar, choosing appropriate lighting fixtures for the hangar lighting can reduce energy consumption And increase visibility, thereby reducing errors and inc
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved