● Watt: 150W
● Lumens: 19,500/ 22,500
● Light Source: Osram 2835
● Input Volt: 100-277VAC
● IP Rating: IP65 - IK08
● Size: Dia280*157mm
● CCT (Color Temp): 3000-6500k
● 5 years warranty
● Beam Angle: 60/ 90/ 120 degree
|CRI||Ra70 (Ra80, Ra90 optional)|
|IP Rating||IP65 Waterproof|
|Light Source||Osram 2835|
|Beam angle||60/90/120 degree Lens|
|Replacement||250-300W HID/ Metal Halide|
|Certificates||ETL, cETL, CE, RoHS, SAA Listed|
|Option add ons||Extended wires with plug can be customed specially according to different countries|
150W Dimmable 0-10v UFO LED High Bay Lighting
1. Light weight: using patented design process and heat dissipation material, lighter than its counterparts, and fins
The film is fine, the heat dissipation area is large, and the heat dissipation is faster.
2. Multi-application: the bracket adopts thread locking, high stability, suitable for all kinds of complex and varied Application.
3. Multi-angle adjustment: reasonable design facilitates adjustment of different azimuth angles
4. High protection: IP65 protection level
5. Professional heat dissipation structure, air passage design inside and outside, greatly improving heat dissipation performance.
Extend the life of the whole lamp
6. Large-area integrated die-cast aluminum housing, integrated whole lamp cooling
The Integrated sensor is combined with the luminaire, which is automatically turned on when someone passes, and automatically turns off when no one passes. In this way, the lamp energy consumption is reduced, the lamp life is extended, and the operation convenience is improved.
1.Anti-dust design,able to be withflushable cleaning.
2.can't be immersed into the water
Three optional installation methods,
3.yoke bracket installation
Infrared remote control (optional)
Carton size: 37*37*21cm
Gross weight: 3.48kg
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved