● Watt: 60W
● Lumens: 7,200
● Light Source: Philips SMD 3030
● Input Volt: 100-277VAC
● Size: 14.21*9.25*7.36
● Lamp Weight: 3.8kg
● CCT (Color Temp): 3000-6500K
● 5 years warranty
● Certification: CE RoHS ETL DLC
|Driver Power||UL TUV CE Approved|
|Light Source||Philips SMD 3030|
|CCT||3000K 4000K 5000K 5700K 6500K|
|Input Voltage||100-277VAC and 347-480VAC|
|Construction||High pressure die-casting aluminum external|
|Installation Method||Wall installation|
|Working Tempe / Humidity||-45 to + 50 Deg C / @Ta=25 Deg C|
|Warranty||5 year Warranty|
|Equivalent||250W metal halide / HID wall pack Equivalent|
|Certified||CE RoHS ETL DLC|
60W 7200LM Exterior Wall Mounted LED Light
The LED wall pack lights uses High strength and die-cast aluminium casing, printing static and thermoplastic external surface which is corrosion resistant, shock resistant, hard and durable. The use of high-strength shell of aluminum die-casting, with good heat dissipation, the characte.
And there are a number of authoritative certification, quality assurance.
1.5 years warranty
2.Original Philips SMD 3030 which up to 110Lm/W to 120Lm/W
3.With the best quality UL driver.
4.They are assembled by module light weight aluminum fin.
5.IP65 waterproof ,dust-proof ,explosion-proof and anti-corrosion.
6.Using aluminum fin heat sink which heat transfer faster than die cast.
7.Tiny package and lighter,lower freight cost,more competitive in the market.
8Avaialble for warehouse,tunnel lighting,advertisement ,gas station and factory lighting etc.
AvaiaBle for warehouse,tunnel lighting,advertisement,gas station and factory lighting etc.
60W: 1pcs/carton size: 41*31*27cm
The composition of light contains many different spectral components, and light with wavelengths between 380 and 760 nm (that is, red, yellow, green, blue, and purple light) is an active band in the spectrum, and different spectral wavelengths will Have different effects on plants.
Although the purpose is for safety, in fact, considering the feelings of street users, the key to making a good lighting plan is not just to illuminate the ground. Also need to consider the overall landscape shape of the lamp, wattage, location, safety, cost, durability and other elements. And from the way of use and sensory experience, the park la
By using billboard lighting to make your billboard more attractive and bring more business. Most of the existing billboards use metal halide or high-pressure sodium traditional lighting. These technologies have been gradually eliminated. They have high power consumption, low color rendering, uncontrollable, need to warm up, and low life span. When
After dark, many people will walk or run in the outdoor community park at night, but if the lights illuminating the park roads are dim with some flickering, this is obviously not satisfactory. The lighting of parks and gardens should enable people to distinguish obstacles or other hazards, and achieve decorative and energy-saving effects. As a part
Copyright © Lamp Shining Manufacturing Co., Ltd. All Rights Reserved